Views
8 years ago

FALL 2015

  • Text
  • Fastener
  • Fasteners
  • Products
  • Distributors
  • Washers
  • Manufacturing
  • Distributor
  • Screws
  • Association
  • Industrial
Distributor's Link Magazine Fall Issue 2015 / Vol 38 No4

88 THE DISTRIBUTOR’S

88 THE DISTRIBUTOR’S LINK GLOBALFASTENERNEWS.COM by JOHN WOLZ EDITOR editor@globalfastenernews.com ROBOTS TO INSTALL 50,000 FASTENERS ON BOEING 777s One of the world’s largest robotics companies invented a new automated system to install 50,000 fasteners on the fuselage of each new Boeing 777. Boeing is counting on robots to cut production costs. The Puget Sound Business Journalreported on the testing the robot in an industrial park near Boeing’s Everett, WA, plant. “There, orange robotic arms bend and pivot in a mechanized dance,” reporter Steve Wilhelm of the Business Journal described the test. Today the fasteners are installed by hand. Wilhelm describes the scene: “Twin robot arms mounted on the machine’s self-driven, wheeled platform will slowly creep along the inside of the fuselage. At the same pace, a crawler outside the fuselage will aim a corresponding arm at the plane’s exterior. The drilling, placement and completion of each fastener from the inside and outside robot arms will be perfectly aligned with each other for an instant, before moving on to be perfectly aligned for the next drilling and fastening moment.” “Think of it like a sewing machine,” Boeing vice president of 777 operations Jason Clark, told the Business Journal. The orange robots are engineered by Kuka Systems, the German company which engineered robots to build cars. Last year Kuka opened up the 30,000-sq ft facility in Everett. Kuka Systems is a unit of Kuka AG, a German company that generated billion in revenue last year. The focus of Kuka’s Boeing work is the 777X, the upcoming wide-body jet with new engines and carbon composite wings. Aerospace is different from Kuka’s automotive work. While 60 autos an hour can be produced on an automotive assembly line, the 777s are manufactured at a rate of 8.3 jets a month. Part of that assembly process turns the fuselage upside down so workers can get access to one section at a time. “But robots, unlike humans, can work at any angle without discomfort,” Wilhelm observed. So in 2013 Boeing and Kuka began a collaboration “to revolutionize the building of the 777.” Boeing calls the result FAUB – or “fuselage automated upright build,” which allow fuselages to stay upright during the entire production process, saving time and money. The Kuka robotized drilling and riveting machine is nearly ready to produce planes. BUSINESS FOCUS ARTICLE Robots will replace some people, but with increasing production and opening a second 777 line in Everett means that nobody will lose jobs soon, Boeing executives told the Business Journal. Robot technology will relieve workers from some repetitive jobs. However, Jon Holden, president of the Machinists District Lodge 751, expressed concern that “automation absolutely takes away the jobs we do manually. Those jobs are tough, hard and dirty — but we value those jobs, we don’t want to get rid of those jobs,” Holden told the Business Journal. “If anything, we’d like to make those jobs safer.” Boeing’s Clark that the traditional riveting is “really hard on the shoulders and the body’s mechanics. We’d rather move mechanics into positions where they’re running equipment to do that kind of work.” Boeing also is turning to automation to cuts costs. “Our imperative is to deliver on a record backlog of more than 5,700 airplanes, with an intense focus on profitability,” CEO Jim McNerney said. The technology goal is to keep down costs and thus prices down on the upcoming 777X. The 405-passenger 777-9X, sells for 9 million. Boeing competes with Europe’s Airbus, but also faces emerging challenge Commercial Aircraft Corp. of China, which is developing a competing aircraft to the Boeing 737. Aerospace consultant Scott Hamilton of Leeham LLC said factory cost cutting is “very pivotal. Boeing has been extremely good about lean manufacturing; in some ways they were ahead of Airbus on that.” GLOBALFASTENERNEWS.COM

SUNCOR STAINLESS INC 70 Armstrong Road, Plymouth, MA 02360 TEL 1-800-218-7702 FAX 508-732-9798 EMAIL info@suncorstainless.com WEB www.suncorstainless.com WE CAN MAKE YOUR COMPLEX SPECIALIZED CUSTOM PARTS Beginning as a part-time venture in 1985, Suncor Stainless, Inc. has grown out of its many locations including the residential garage of founder Roman Striebel, a 3,000 and a 20,000 square foot warehouse. Just over 20 years after the company was begun by Roman and son Patrick, it has become one of the world’s most complete sources of stainless steel hardware, demanding a 70,000 square foot state-of-the-art building with room for future growth to accommodate an everyexpanding product line. Such expansion can be attributed to the superior parts and components available at Suncor, but also to the dedicated and knowledgeable team that develop those very products and introduce them to the marketplace. With the goal of becoming the largest manufacturer of stainless steel hardware, chain and wire rope, Suncor has expanded more than its square footage. The initial product line of 35 items has quickly grown to encompass thousands of different products including shackles, turnbuckles, THE DISTRIBUTOR’S LINK 89 eyebolts, hooks, hinges, pad eyes, swage fittings and so much more. Their facility offers a machine shop, manufacturing department, assembly and packaging under one roof. This efficiency not only improves quality control, but allows for the production of customized hardware made to the customers’ exact specifications. Suncor is constantly evolving with the times and responding to their customers’ needs. They have recently launched a new website that enables it to adapt/format properly to a variety of devices (phone, tablet, laptop, etc.). They are constantly investing in new machinery to maximize domestic operations. For many years now they have maintained a quality management system that earns an ISO 9001 certification. Suncor’s reputation and the respect from its customers are earned through proving time and time again their desire and ability to be the best source for stainless steel hardware. BUSINESS FOCUS ARTICLE SUNCOR STAINLESS INC

SHARE A PAGE FROM THIS MAGAZINE

OPTION 1: Click on the share tab above, or OPTION 2: Click on the icon (far right of toolbar) and then click on the icon (top right of the page).

Copyright © Distributor's Link, Inc. All Rights Reserved | Privacy Policy