Views
4 years ago

SPRING 2015

  • Text
  • Fastener
  • Fasteners
  • Products
  • Association
  • Distributors
  • Industrial
  • Components
  • Washers
  • Goodwill
  • Purchase
Distributor's Link Magazine Spring Issue 2015 / Vol 38 No2

38 THE DISTRIBUTOR’S

38 THE DISTRIBUTOR’S LINK Joe Greenslade Director of Engineering Technology INDUSTRIAL FASTENERS INSTITUTE 636 Oak Tree Blvd., Independence, OH 44131 TEL 216-241-1482 FAX 216-241-5901 EMAIL jgreenslade@indfast.org WEB www.indfast.org FEBRUARY 2015 FASTENER INDUSTRY TECHNOLOGY UPDATE 1. Standards Organizations Activities [a] Standards Published Last Month ASME B18.8.1 Inch clevis and cotter pins ISO 13469:2014-06 Mechanical joining - Form-fit blind rivets and (lock) bolt joints - Specifications and qualification of testing procedures ISO 16237:2014-11 Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for cross-tension testing of single joints ISO 10664:2014 Hexalobular internal drive feature for bolts and screws ISO 8735:2014 Parallel pins with internal thread, of hardened steel and martensitic stainless steel RCSC Specification 2014 www.boltcouncil.org ASTM A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength has been revised to A490-14a developed by Committee F16.02, ASTM BOS Volume 01.08. ASTM A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) has been revised to A490M-14a developed by Committee F16.02, ASTM BOS Volume 01.08. ASTM F468 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use has been revised to F468-13 developed by Committee F16.04, ASTM BOS Volume 01.08. ASTM A193/A193M Standard Specification for Alloy- Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications. [b] Standards that have passed committee balloting and are in the publication process: ASME B18.31.3 Threaded rod (inch) ASTM F606/F606M Fastener Testing Standard (inch/metric combined) ASTM F3125 Structural Bolt Standard, A new standard is in the works which is a compilation of inch and metric bolt standards including A325, A490, F1852, F2280, A449, A354, A325M, and A490M. This is an effort to make the requirements of these related bolt standards consistent. [c] Standards in the revision process ASME B18.2.1 Bolts and Cap Screws (inch series). Sept 2014, work has begun to add a missing Lg/Lb table for hex flange head screws and correct a few other minor issues. Completion is expected in 2015. ASME B18.2.2 Non-locking Nuts (inch series). Sept 2014, work has begun to correct an error in the hex sizes of “Small Pattern Hex Machine Screw Nuts”. Completion is expected in 2015. ASME B18.2.6 Structural Fasteners (inch series). Sept 2014, work has begun to revise this standard to incorporate a critical table note currently covered by a Supplement and to make minor revisions to the DTI portion of the standard. Completion is expected in 2015. ASME B18.2.6M Bolt for Structural Construction and High Pressure Applications (metric series). Sept 2014, work will begin to increase the size range from M36 through M100 and to make some minor revisions to the DTI portion of the standard. Completion is expected in 2015. TECHNICAL ARTICLE CONTINUED ON PAGE 152

SHARE A PAGE FROM THIS MAGAZINE

OPTION 1: Click on the share tab above, or OPTION 2: Click on the icon (far right of toolbar) and then click on the icon (top right of the page).

View Archives

SUMMER 2019
SPRING 2019
WINTER 2019
FALL 2018
SUMMER 2018
SPRING 2018
WINTER 2018
FALL 2017
SUMMER 2017
SPRING 2017
WINTER 2017
FALL 2016
SUMMER 2016
SPRING 2016
WINTER 2016
FALL 2015
SUMMER 2015
SPRING 2015
WINTER 2015
FALL 2014
SUMMER 2014
SPRING 2014
WINTER 2014
FALL 2013
SUMMER 2013
SPRING 2013
WINTER 2013
FALL 2012
SUMMER 2012
SPRING 2012
WINTER 2012
FALL 2011
SUMMER 2011
SPRING 2011
WINTER 2011

Copyright © Distributor's Link, Inc. All Rights Reserved | Privacy Policy